Resin printing Failures ... A FAQ
A casual list of failures and things I do to put them right when resin printing. As I come across more, I will update this page.
Tim Wilkes
Resin printer setup
I get asked from time to time what I use for 3D resin printing. While I am still getting to grips with all the ins and outs, I have had some good results.
New Printer, Who Dis?
I bought myself an older CR-10 MAX printer to do some larger prints from ebay. It came with one known fault - an issue with the BL Touch. Spending £150 on a printer with £50 P&P - what could go wrong?
Fixing affliate links in Ghost
At some point (hopefully soon ...) I would like my blog to at least be able to generate some income. Getting off the ground is a bit of a pain. Amazon have minium of 3 sales before you can properly become an affliate.
Deploying vault via docker and ansible
Adding to my in-promptu series on automating docker containers with ansible, this time I'm looking at Hashicorp's Vault. This is slightly different, in that it required a binary to be installed on the ansible controller (a raspberry pi). Once vault is deployed, we need to unseal the containter.
Monitoring DMARC with Docker
In this post, I deploy a docker container via docker compose and ansible to read my dmarc reports.
Overture PLA
After a bit of a disaster with the Glow in the dark filament, I moved to a marble based filament by Overture. As I had just bought 2KG of this filament (it was cheap on Amazon) and then another 2 of matt white PLA (at about £8 per roll), I really wanted a nice easy filamant to work with.
Using ansible to deploy a gitlab runner.
After deploying watchtower to one of my docker instances, I noticed that it was having issues with restarting the container. The actual fault turned out to be the networking with portainer, but in the meantime, I wrote an ansible playbook to redeploy / restart the container.
Troubleshooting Glow-in-the-Dark (GITD) Filament: My Real-World Experience
A couple of years ago I bought a roll of glow in the dark filament from the company Amolen. As I have only 1 roll, I have no idea if my experiences are indicative of the filament in general, or just a one off.
Deploying Plex with docker and ansible
After deploying watchtower to one of my docker instances, I noticed that it was having issues with restarting the container. The actual fault turned out to be the networking with portainer, but in the meantime, I wrote an ansible playbook to redeploy / restart the container.